A gas station utility bill review connects each meter, service period, and rate schedule to the expense recorded in the accounts. Separate energy use, billed demand, fixed charges, adjustments, and setup cash. Check the buyer’s actual service terms and operating plan before forecasting costs. Historical bills explain the past; they do not guarantee the incoming owner’s charges.
Where should the utility review begin?
Begin with complete bills for all the services used by the station, then map them to the physical site. Electricity, gas, water, sewer, and related services may have different providers and account holders. The cost shown in one P&L line may combine several accounts or omit a charge paid elsewhere.
Use the operations hub to connect this work to staffing, foodservice, maintenance, and the transfer plan. The review should explain costs and open questions without claiming that every high bill is waste. Actual equipment, hours, weather, rates, and billing terms all deserve consideration.
Which meters and service boundaries need to be checked?
Record the provider, meter ID, service address, account holder, and areas served. Ask which equipment and tenants share the service. A meter located on the station property may also support another use, so match the bill to the actual arrangement rather than the postal address alone.
Check the lease and any reimbursement or shared-service agreement with the responsible adviser. Identify who pays the provider and who bears the cost under the agreement. A payment through a landlord may be part of the station’s expense even when no utility account is in the operator’s name.
Ask the seller to explain added, removed, or replaced meters during the review period. Preserve the final bills and new account dates where relevant. A gap caused by an account change should not be treated as a month of free service in the earnings analysis.
What records should the buyer request?
Obtain enough consecutive periods to review seasonality and the changes relevant to the deal. Ask for original bills, current tariffs, supply agreements, account adjustments, and supporting ledger entries. Keep estimated readings and later corrections visible rather than presenting a corrected annual total without its history.
DOE’s utility-rate guide recommends reviewing both supply and distribution bills when those are separate. It also describes interval data as useful where available. Its framework helps organize the review, but it does not determine this station’s tariff or account rights.
Request detailed usage only through an authorized route. DOE’s Green Button guidance describes customer downloads and opt-in sharing with third parties. The data detail depends on what the utility provides; do not presume every account offers the same intervals or history.
How do energy, demand, and fixed charges differ?
Energy use and the rate of use answer different questions. Kilowatt-hours describe the electricity consumed over time. Kilowatts describe power demand, while the actual tariff determines which measured or calculated demand becomes a billed charge.
DOE’s guide separates energy, demand, and fixed components and explains that some schedules use prior peaks in a demand calculation. Check the actual rate schedule for any such rule. A drop in one month’s usage does not by itself prove that billed demand or the total charge should fall by the same amount.
Do not divide the total bill by kilowatt-hours and treat the result as a portable tariff. That blended number can be a descriptive ratio for the period. It may not predict the cost of changed hours, new equipment, a different demand peak, or a different account classification.
| Item | Evidence to check | Reason for keeping it separate |
|---|---|---|
| Energy use | Meter quantity and service dates | Shows consumption during the stated period |
| Demand charge | Billed demand and actual tariff method | May respond differently from total energy use |
| Fixed and other charges | Bill lines and applicable schedule | Need not move with consumption |
| Billing adjustment | Original bill, correction and ledger entry | Can affect comparisons between periods |
| Deposit or setup cash | Incoming account terms and accounting review | Cash needed is not automatically recurring expense |
What does a worked electricity bill example show?
Consider a hypothetical bill with 12,000 kilowatt-hours charged at $0.10 each, 50 kilowatts of billed demand charged at $12 each, and a $100 fixed charge. The illustrated components are $1,200, $600, and $100. Their total is $1,900 before any other applicable items.
If energy use falls by ten percent while the other example components stay the same, the energy charge becomes $1,080. The total becomes $1,780, a $120 reduction. It does not fall by ten percent because the example holds demand and the fixed charge unchanged.
These figures are not market rates or a savings promise. The actual bill may use different periods, tiers, adjustments, taxes, or demand rules. Use the example only to see why a forecast must preserve the separate components and the conditions that affect them.
How should bills be matched to the P&L?
Match service periods and accounting entries before comparing monthly totals. A payment date may differ from the period when the service was consumed. Ask the financial adviser to explain the seller’s accounting method and any year-end accrual, correction, or reclassification that affects the comparison.
Identify deposits, late charges, refunds, and bills covering more than one business. Determine their actual treatment rather than automatically removing them from earnings. Keep the supporting entries and the adviser’s explanation so the buyer can distinguish a recurring cost from a separate cash or timing item.
The P&L guide provides the broader reconciliation process. Use the same reviewed periods when comparing utility costs with sales and operating activity. A low expense ratio does not establish that all the relevant bills were included or that costs will stay low after closing.
Which operating changes can make the past less useful?
Record changes in store hours, equipment, occupied space, and operating activity during the bill history. Compare those dates with changes in usage and cost. A cost increase following a new service does not prove poor management, and a decrease during reduced trading does not prove a lasting efficiency gain.
The staffing and owner-dependence guide helps document hours and the proposed operating plan. Ask qualified advisers how that plan affects required equipment operation. Do not build a savings case around shutting down systems needed for food safety, security, or the planned customer service.
For foodservice or car-wash investments, review the extra service needs and the actual quoted scope. Keep an existing-site cost baseline separate from a proposed project. Count shared utility costs consistently so one expense is not charged to both the store and the new service.
How can the buyer confirm data access and service setup?
Ask the utility which historical records can be supplied and what authority is required. ENERGY STAR’s utility-data map helps locate providers offering benchmarking data. Confirm access for the actual meter rather than treating a map entry as proof that every record is available.
Separately confirm the incoming account holder, service start date, deposits, payment method, and any outstanding setup conditions. Ask how final seller readings and the buyer’s opening period will be recorded. Historical data permission does not establish a completed account transition or an uninterrupted service arrangement.
What belongs in the final operating budget?
Use the reviewed bill history, confirmed tariff, and planned operation to build a supported base case. Show a downside case for unresolved usage or rate questions where justified. Give each assumption an owner and a source so a later change can be traced through the budget.
Keep startup cash separate from recurring service expense and any proposed upgrade spending. Confirm that the forecast includes all mapped services and supported reimbursements. The buyer then has a utility plan grounded in actual records, current terms, and visible uncertainty rather than an average bill presented as a guarantee.
The inside-margin and shrink guide applies the same discipline to other operating costs. Document the cause and supported correction before claiming that a proposed control will increase the station’s recurring earnings.